IBM 6000 - Server Canister Status Leds; Description of the System Status Leds

Table 23. Description of the system status LEDs
LED type Color States Description
Power True green Off No external power to the
enclosure.
Slow blink The enclosure is in a
stand-by state.
Solid AC power to the
enclosure and at least
one canister is not in
stand-by.
Fault Amber Off No isolated FRU failures
on the enclosure.
Solid The enclosure has one
or more isolated FRU
failures and they require
service or replacement.
Identify Blue Off The enclosure is not
being identied.
Solid The enclosure has been
set to Identify.
Server canister status LEDs
These LEDs are used to monitor the status of server canisters and Ethernet ports of the IBM Storage Scale
System 6000.
The IBM Storage Scale System 6000 server has three status LEDs on the operator panel of each server
canister. In addition, two Ethernet port LEDs per Ethernet port (four LEDs) and two BMC port LEDs are
part of each server canister's status LEDs.
The following images show the server canister LEDs included in the IBM Storage Scale System 6000.
Figure 36. IBM Storage Scale System 6000 server canister LEDs
The following gure shows a close-up view of server canister LEDs.
54
IBM Storage Scale System 6000: Hardware Planning and Installation Guide