18
Maintenance Overview
Printing Conventions in This Manual
♦ Operator panel keys and indicators are printed bold.
Example: Press the Cancel key, then press the Start key.
♦ Liquid Crystal Display (LCD) messages are printed in capital letters
inside quotation marks ( “ ” ).
Example: Press the Stop key. “NOT READY” appears on the LCD.
♦ Key combinations are denoted by the + (plus) symbol.
Example: Press Scroll + Scroll
means
Press the
Scroll
key and the
Scroll
key at the same time.
Related Documents
To ensure complete understanding of important safety notices for technicians
whose native language is not English, the notices have been translated into
many languages in the
IBM 6400 Line Matrix Printer Safety Notices
: Form
No. G544–5389.
This maintenance manual does not explain how to operate or configure the
printer. For that information, refer to the
Operator’s Guide
and
Setup Guide
:
♦
IBM 6400 Line Matrix Printer Operator’s Guide,
Form No. S544–5641
Illustrated instructions on daily printer operation.
♦
IBM 6400 Line Matrix Printer Setup Guide,
Form No. S544–5640
Explains how to install and configure the printer.
♦
Coax/Twinax Multi-Platform Interface Option Installation and Operation
Guide
, Form Number S544–5642
Information pertaining to printer control languages, emulations, and control
codes is in the applicable
Programmer’s Reference
manual:
♦
IBM 6400 ASCII Programmer’s Reference
: Form No. S544–5635
♦
IBM 6400 CTA Programmer’s Reference
: Form No. S544–5636
♦
IBM 6400 IPDS Programmer’s Reference
: Form No. S544–5637
Information pertaining to graphics programming is in the applicable
User’s
Manual
:
To Next Page
Loading...
Need help?
General
