334 Printer Specifications
Fax orders may be sent to: 1–800–522–3422
Mail orders may be sent to: Lexmark International, Inc., 1221 Alverser Drive,
Midlothian, VA 23113.
Ordering Ribbons (Outside of U.S.)
Order supplies by contacting your local Lexmark International distributor or
by writing to Lexmark International, Inc.
Lexmark International, Inc.
P.O. Box 11427
Lexington, KY, 40575–1427 USA
Paper Specifications
NOTE: The following paper specifications are general guidelines. Paper
stock should be tested with applications to determine print quality.
Paper
Type: Edge-perforated, fan-fold, 3 to 17 inches (7.62 to 43.18 cm) wide*, 2 to
24 inches (5.08 to 60.96 cm) long**
♦ Single-part: 15 pound (57 g/m
2
) to 100 pound (377 g/m
2
) stock.
♦ Multi-part carbon: 1- to 6-part forms, maximum 12 pound (45 g/m
2)
ply of
upper plies
♦ Multi-part carbonless. Verify readability of greater than 4-part.
Thickness: 0.025 inches (0.064 cm) maximum
Drive: Adjustable tractors, 6-pin engagement
Slew Rates: Fast
Slow
6400–004, –04P 12 ips 8 ips
6400–005, –05P 12 ips 8 ips
6400–050, –P50 12 ips 10.4 ips
6400–008, –08P 16 ips 8 ips
6400–09P 16 ips 8 ips
6400–009 20 ips 10 ips
6500–P10 16 ips 10.4 ips
6500–010 20 ips 10.4 ips
6400–012 20 ips 10 ips
6400–014 20 ips 10 ips
6400–015 25 ips 10.4 ips
Labels
On Backing: One-part continuous perforated fan-fold back form. Labels must
be placed at least 1/6 inch (0.42 cm) from the fan-fold perforation. Backing
adhesive must not be squeezed out during printing.
To Next Page
Loading...
Need help?
General
