268 IBM eX5 Implementation Guide
Figure 6-44 Define the source and target
5. When the copy process is finished, as shown in Figure 6-45, click Finish.
Figure 6-45 The copy process successfully completes
6. Open a command prompt and change to the C:\sgshare\sgdeploy\SGTKWinPE directory.
Use the following command to create the Windows installation image:
SGTKWinPE.cmd ScenarioINIs\Local\Win2008_R2_x64_EE.ini
7. When the process is finished, as shown in Figure 6-46 on page 269, your media creation
software is started to create bootable media from the image. Cancel this task.
To Next Page
Loading...
