Chapter 6. IBM System x3850 X5 and x3950 X5 277
9. The Boot Options line will appear on the panel. Type the following parameter at the end of
the Boot Options line:
allowInterleavedNUMAnodes=TRUE
The edited result looks like Figure 6-55. Press Enter to proceed.
Figure 6-55 Editing the Boot Options
10.Proceed through the installer until you reach the Setup Type page. Click Advanced setup
and clear Configure bootloader automatically (leave checked if unsure) as shown in
Figure 6-56. Click Next.
Figure 6-56 Modifying the ESX installation
To Next Page
Loading...
Need help?
General