EasyManuals Logo

IBM BladeCenter HX5 Implementation Guide

IBM BladeCenter HX5
580 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #370 background imageLoading...
Page #370 background image
350 IBM eX5 Implementation Guide
For the full details, see the IBM ServerGuide Scripting Toolkit, Windows Edition Users
Reference and IBM ServerGuide Scripting Toolkit, Linux Edition User’s Reference at the
following website:
http://ibm.com/support/entry/portal/docdisplay?lndocid=SERV-TOOLKIT
Windows installation
This section describes the process to install the ServerGuide Scripting Toolkit, create a
deployment image for Windows Server 2008 R2 Enterprise Edition, and copy this image to a
USB key for deployment. To configure a USB key for deployment, you need the following
devices:
򐂰 A system running Windows Vista, Windows Server 2008, Windows 7, Windows Server
2008 R2, Windows 2.1 Preinstallation Environment (PE), or a Windows 3.0 PE session
򐂰 A USB key with a storage capacity at least 64 MB larger than your Windows PE image, but
not less than 4 GB
Procedure
We use this procedure:
1. Install the ServerGuide Scripting Toolkit.
2. Create a deployment image.
3. Prepare the USB key.
Installing the ServerGuide Scripting Toolkit
You must install the English language version of the Windows Automated Installation Kit (AIK)
for the Windows 7 family, Windows Server 2008 family, and Windows Server 2008 R2 family,
which is available at the following website:
http://www.microsoft.com/downloads/en/details.aspx?familyid=696DD665-9F76-4177-A81
1-39C26D3B3B34&displaylang=en
Follow these steps to install the ServerGuide Scripting Toolkit, Windows Edition:
1. Download the latest version from the following website:
http://ibm.com/support/entry/portal/docdisplay?lndocid=SERV-TOOLKIT
2. Create a directory, for example, C:\sgshare.
3. Decompress the
ibm_utl_sgtkwin_X.XX_windows_32-64.zip file to the directory that
you created, for example, C:\sgshare\sgdeploy.
Creating a deployment image
Follow these steps to create a Windows installation image:
1. Start the Toolkit Configuration Utility in the C:\sgshare\sgdeploy directory.
2. Select Add Operating System Installation Files, as shown in Figure 7-46 on page 351.

Table of Contents

Other manuals for IBM BladeCenter HX5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM BladeCenter HX5 and is the answer not in the manual?

IBM BladeCenter HX5 Specifications

General IconGeneral
BrandIBM
ModelBladeCenter HX5
CategoryServer
LanguageEnglish

Related product manuals