Chapter 8. IBM BladeCenter HX5 423
Figure 8-57 Example of a boot order
f. Select Commit Changes and press Enter to save the changes.
2. Boot the host from the ESX installation media.
3. Press F2 when you receive the installation options panel, as shown in Figure 8-58.
Figure 8-58 ESX installation options panel
4. The Boot Options line appears on the panel. Type the following parameter at the end of
the Boot Options line:
allowInterleavedNUMAnodes=TRUE
The edited result looks like Figure 8-59 on page 424. Press Enter to proceed.
To Next Page
Loading...
Need help?
General