IBM Flex System p260 - Page 293

CA00E1F3
Explanation: Privileged-access password prompt
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1F4
Explanation: End self-test sequence on one or more boot devices; begin system management services
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1F5
Explanation: Build boot device list
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1F6
Explanation: Determine boot device sequence
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1F7
Explanation: No boot image located
Response: Go to Boot problem resolution.
CA00E1F8
Explanation: Build boot device list for SCSD adapters. (The location code of the SCSD adapter being scanned is also
displayed.)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1F3 • CA00E1F8
Chapter 8. Troubleshooting 281