CA00E1F9
Explanation: Build boot device list for fibre-channel adapters. (The location code of the SAN adapter being scanned
is also displayed.)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1FA
Explanation: Building device list for SCSD adapters. (The device ID and device LUN of the device being scanned is
also displayed.)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1FB
Explanation: Scan SCSD bus for attached devices
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1FC
Explanation: Build boot device list for SSA adapters. (The location code of the SSA adapter being scanned is also
displayed.)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1FE
Explanation: Building device list for fibre-channel (SAN) adapters. (The WWPN of the SAN adapter being scanned
is also displayed.)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1F9 • CA00E1FE
282 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide
To Next Page
Loading...
