Chapter 4. IBM System Storage DS planning and configuration 225
4. If you want to send e-mail alerts, you have to define an SMTP server first. Enter the Mail
SMTP Server name or IP address of your mail server and the e-mail that will show as the
origin of the message, as shown in Figure 4-92. You can also complete the contact
information, if desired.
Figure 4-92 Configure Alerts: Defining the SMTP server
5. Select the Email tab. This tab allows you to configure the e-mail addresses to which the
alerts are sent. Enter the e-mail address and press Add to append it to the list of
notifications.
To Next Page
Loading...
