276 IBM Midrange System Storage Hardware Guide
Save the security key file, as discussed in 5.4.2, “Save security key file” on page 272.
Obtain blank canisters or new drives to be inserted in the DS5000 when the drives are
removed.
On the target DS5000:
Verify that there are available drive slots to host the disk drives.
Check that the drives that are being moved are supported. The Drive Security premium
feature should be already enabled, as shown in Figure 5-4 on page 265.
Verify that the firmware is the same on the target DS5000 as the source DS5000, and is
up to date.
Unlock drives before importing the array.
5.5.2 Export the array
From the Storage Manager window, in the Logical tab, select the array that you want to export
and then select Advanced Maintenance Export Array.
The Export Array wizard will guide you through the export.
Figure 5-16 Export Array wizard
The window with the preparation checklist opens, as shown in Figure 5-17 on page 277.
Check that no planning steps have been missed.
To Next Page
Loading...
Need help?
General