IBM Midrange System DS4000 Series User Manual

364 IBM Midrange System Storage Hardware Guide
Once the file is generated, open the zip file, and then look at the file named
featureBundle.txt to see the status, limits, and in-usage capacities for the premium
features, as illustrated in Example 7-1.
Example 7-1 Collect support data featureBundle.txt file
FEATURE BUNDLE FOR STORAGE SUBSYSTEM: ITSO5300 (Mon Sep 07 18:46:44 CAT
2009)
Total logical drives allowed: 2048
Total logical drives allowed per partition: 256
Management application client: 1
Drives supported: B; J; S; E; BM
Drive enclosures supported: IBM,EXP5000,HUSKER;
IBM,EXP810,HUSKER; IBM,EXP5060,WEMBLEY-HUSKER
High Performance Tier: No data is available about
supported values of this feature
Storage Partitioning
Enabled by default: Yes
Default limit: 2
Enable/Upgrade via key: Yes
Limit with feature key: 512
FlashCopy Logical Drives
Enabled by default: Yes
Enable/Upgrade via key: Yes
Total flashcopies allowed: 2
VolumeCopy
Enabled by default: No
Enable/Upgrade via key: Yes
Total copies allowed: 2048
Remote Logical Drive Mirroring
Enabled by default: No
Enable/Upgrade via key: Yes
Total mirrors allowed: 0
Mixed Drive Types
Enabled by default: Yes
Enable/Upgrade via key: No
3. Gather the following data along with the Feature Enable Identifier:
– Machine type
– Model
– Serial number
Note: The machine type, model, and serial information is printed on a label on the back of
your DS storage subsystem controller unit.

IBM Midrange System DS4000 Series Specifications

General

Brand	IBM
Model	Midrange System DS4000 Series
Category	Storage
Language	English