442 IBM Midrange System Storage Hardware Guide
HBAnyware utility (HBAnyware)
The HBAnyware utility (HBAnyware) is a user-friendly graphical environment. Use
HBAnyware to do any of the following actions:
Discover local and remote hosts, host bus adapters (HBAs), targets, and LUNs.
Reset HBAs.
Set up persistent binding.
Set HBA driver parameters.
Set driver parameters simultaneously to multiple HBAs using Batch Update.
Set global driver parameters to HBAs.
Update firmware on the single HBA or multiple HBAs using Batch Update.
Enable boot code.
Run diagnostic tests on HBAs.
Manage out-of-band HBAs.
Manage local and in-band remote HBAs.
Update EFIBoot (64-bit only).
To start HBAnyware for Windows, perform the following steps:
1. On the Windows desktop, select Start Programs Emulex HBAnyware.
2. The initial discovery information for the host appears, as shown in Figure 7-77.
Figure 7-77 HBAnyware Utility main window
Discovered HBAs and Targets
Property tabs
HBA FW version
To Next Page
Loading...
Need help?
General