© Copyright IBM Corp. 2010. All rights reserved. 473
Chapter 8. Command-line interface and
Script Editor
All Storage Manager functions available through the Subsystem Management window can
also be performed and sent to an IBM System Storage DS storage subsystem using
statements in scripts. The Script Editor can be used to create or edit a script file, save a script
file to the Storage Manager station’s local disk, or load a script file from disk. The
command-line interface (CLI) can also be used to issue individual commands to the scripting
engine from the host operating system command line or to invoke complete, pre-written
scripts.
This chapter explains how to work with the command-line interface and the Script Editor. For
detailed information about all the CLI parameters, consult the Command Line reference
included in the SMclient online help or the guide IBM System Storage DS3000, DS4000, and
DS5000 Command Line Interface and Script Commands Programming Guide, GC52-1275.
To Next Page
Loading...
Need help?
General