IBM Midrange System DS4000 Series User Manual

492 IBM Midrange System Storage Hardware Guide
Remote Mirror commands
Table 8-10 lists these commands.
Table 8-10 Remote Mirror commands
Command Description
activate storageSubsystem
feature=remoteMirror
This command creates the mirror repository logical drive and
activates the Remote Mirror feature.
create remoteMirror This command creates both the primary and secondary logical drives
for a Remote Mirror.
deactivate
storageSubsystem
feature=remoteMirror
This command deactivates the Remote Mirror feature and tears down
the mirror repository logical drive.
diagnose remoteMirror This command tests the connection between the specified primary
logical drives and mirror logical drives on a storage subsystem with
the Remote Mirror feature installed.
recreate storageSubsystem
mirrorRepository
This command creates a new Remote Mirror repository logical drive
using the parameters defined for a previous Remote Mirror repository
logical drive.
remove remoteMirror This command removes the mirror relationship between the primary
logical drive and secondary logical drive.
resume remoteMirror This command resumes a suspended Remote Mirror operation.
set remoteMirror This command defines the properties for a Remote Mirror pair.
show remoteMirror
candidates
This command returns information about the candidate logical drives
on the remote storage subsystem that you can use as secondary
logical drives for a primary logical drive.
show remoteMirror
localLogicalDrive
synchronizationProgress
This command returns the progress of data synchronization between
the primary logical drive and secondary logical drive in a Remote
Mirror.
start remoteMirror
primary synchronize
This command starts Remote Mirror synchronization.
suspend remoteMirror This command suspends a Remote Mirror operation.

IBM Midrange System DS4000 Series Specifications

General

Brand	IBM
Model	Midrange System DS4000 Series
Category	Storage
Language	English