IBM MTM 2145-SV1

Table 14. Enclosure weight as FRUs are installed (continued)
Enclosure assembly Approximate weight
FRUs installed FRUs not installed kg lb
Note: The following FRUs
are installed when the
enclosure is initially
shipped.
v Enclosure (01LJ112)
v Secondary expansion
modules
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v Display assembly
v Cover
v Fascia (1U and 4U)
v Drives
61.5 135.4
v Enclosure (01LJ112)
v Secondary expansion
modules
v Fascia (1U and 4U)
v PSUs
v Expansion canisters
v Fan modules
v Fan interface boards
v 92 2.5-inch tier 1 flash
drives
v Cover
78.6 173.3
v Enclosure (01LJ112)
v Secondary expansion
modules
v Fascia
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v 92 2.5-inch hard disk
drives
v Cover
86 189.6
v Enclosure (01LJ112)
v Secondary expansion
modules
v Fascia
v PSUs
v Expansion canisters
v Fan modules
v Fan interface board
v 92 3.5-inch Near-Line
SAS hard disk drives
v Cover
138.6 305.6
Chapter 4. Installing an optional 5U SAS expansion enclosure 49