IBM N Series - Page 60

Command Purpose Documentation Release introduced
sp help Displays the Data ONTAP sp
commands that you can enter
at the storage system prompt.
Data ONTAP 8.0
7-Mode System
Administration Guide
na_sp(1) man page
8.0.1
sp reboot Reboots the SP and causes the
SP to perform a self-test.
Data ONTAP 8.0
7-Mode System
Administration Guide
na_sp(1) man page
8.0.1
sp setup Initiates the interactive SP
setup script.
Data ONTAP 8.0
7-Mode System
Administration Guide
na_sp(1) man page
8.0.1
sp status Displays the current status
and the network configuration
of the SP.
Data ONTAP 8.0
7-Mode System
Administration Guide
na_sp(1) man page
8.0.1
sp test autosupport Sends a test email to all
recipients specified with the
autosupport.to option.
Data ONTAP 8.0
7-Mode System
Administration Guide
na_sp(1) man page
8.0.1
sp test snmp Performs SNMP test on the SP,
forcing the SP to send a test
SNMP trap to all trap hosts
specified in the snmp traphost
command.
Data ONTAP 8.0
7-Mode System
Administration Guide
na_sp(1) man page
8.0.1
sp update Updates the SP firmware. Data ONTAP 8.0
7-Mode Upgrade and
Revert/Downgrade
Guide
na_sp(1) man page
8.0.1
storage array modify Modifies attributes of array
profile records.
na_storage(1) man
page
8.0
storage array
purge-database
Removes all records from the
controller's array profile
database.
na_storage(1) man
page
8.0
storage array remove Removes records for the
specified array from the
controller’s array profile
database.
na_storage(1) man
page
8.0
50 IBM System Storage N series: Data ONTAP 8.0.4 7-Mode Release Notes