IBM PS/1 User Manual

MAP 1700 (continued)
034 (continued)
DOES THE SYMPTOM REMAIN?
Yes No
035
Replace the original hard disk drive.
036
Replace the system board.
037
(From step 018)
Error Codes: 1703, 1705, 1706, 1707, 1708, 1709, 1711, 1712, or 1713.
– Check that all electrical connections are secure by disconnecting and then
reconnecting them.
– Repeat the operation or diagnostic test that failed.
DID THE SYMPTOM REMAIN?
Yes No
038
Go to Step 054 on page 2-89.
039
– Power off the system unit.
– Check all lines of the hard disk drive signal cable for continuity.
DO ALL LINES HAVE CONTINUITY?
Yes No
040
Replace the failing cable.
041
(Step 041 continues)
2-86

IBM PS/1 Specifications

General

Processor	Intel 80286 or 80386
Processor Speed	10 MHz (80286)
RAM	1 MB (expandable to 2 MB or more)
Storage	40 MB hard drive
Floppy Drive	3.5" 1.44 MB
Graphics	VGA
Ports	Serial, Parallel, Mouse