MAP 2400 (continued)
013 (continued)
DID THE DISPLAY SELF TEST PATTERN APPEAR?
Yes No
014
Replace the failing SIMM card.
015
– Power off the system unit.
– Remove the other SIMM card.
– Power on the system unit.
DID THE DISPLAY SELF TEST PATTERN APPEAR?
Yes No
016
Replace the failing SIMM card.
017
Go to Step 026 on page 2-101.
018
(From step 006)
– You should have a 486SX, 486DX, or 486DX2 system board.
DOES THE SYSTEM BOARD HAVE EIGHT 30-PIN MEMORY SIMMS
INSTALLED?
Yes No
019
Go to Step 022 on page 2-101.
020
– Power off the system unit.
(Step 020 continues)
2-100
To Next Page
Loading...
