006 (continued)
Go to Step 018 on page 2-100.
007
ARE THERE SIMM CARDS INSTALLED IN THE SYSTEM BOARD?
Yes No
008
Go to Step 026 on page 2-101.
009
ARE TWO SIMM CARDS INSTALLED?
Yes No
010
– Power off the system unit.
– Remove the SIMM card.
– Power on the system unit.
DID THE DISPLAY SELF TEST PATTERN APPEAR?
Yes No
011
Replace the failing SIMM card.
012
Go to Step 026 on page 2-101.
013
– Power off the system unit.
– Remove one SIMM card.
– Power on the system unit.
(Step 013 continues)
Diagnostic Information 2-99
To Next Page
Loading...
