032 (continued)
IS THE DISPLAY POWER-ON INDICATOR LIT?
Yes No
033
Go to Step 035.
034
Replace the display.
035
(From step 033)
DOES YOUR SYSTEM HAVE A POWER CORD BETWEEN THE SYSTEM
UNIT AND THE DISPLAY?
Yes No
036
– Power off the display.
– Disconnect the power cord from the back of the display.
– Measure line voltage at the display end of the power cord.
DO YOU HAVE THE CORRECT LINE VOLTAGE?
Yes No
037
– Check the power at the electrical outlet.
– Also check the continuity of the power cord.
– Replace the power cord or plug the machine into a functioning
electrical outlet.
038
Go to Step 043 on page 2-104.
039
(Step 039 continues)
Diagnostic Information 2-103
To Next Page
Loading...
