IBM PS/1 User Manual

MAP 0200 (continued)
054 (continued)
DID YOU RECEIVE AN XXXXXX XXXX 201, 203, OR 221
POST ERROR?
Yes No
055
Run the system memory test several times to verify the
failure symptom no longer exists.
056
Replace the failing SIMM.
057
Replace the failing SIMM.
058
– Power off the system unit.
– Remove the SIMM from bank 0 and install it in bank 1.
– Power on the system unit.
DID YOU RECEIVE AN XXXXXX XXXX 201, 203, OR 221 POST ERROR?
Yes No
059
– Power off the system unit.
– Remove the SIMM from bank 1 and install the SIMM removed in
Step 050 on page 2-44 in bank 0.
– Power on the system unit.
DID YOU RECEIVE AN XXXXXX XXXX 201, 203, OR 221 POST
ERROR?
Yes No
060
(Step 060 continues)
2-46

IBM PS/1 Specifications

General

Processor	Intel 80286 or 80386
Processor Speed	10 MHz (80286)
RAM	1 MB (expandable to 2 MB or more)
Storage	40 MB hard drive
Floppy Drive	3.5" 1.44 MB
Graphics	VGA
Ports	Serial, Parallel, Mouse