060 (continued)
Your system memory is now functioning correctly. If you
suspect an intermittent problem, start an error log. If you need
instructions, refer to “Error Log” on page 3-9.
061
– Replace the system board.
062
Replace the failing SIMM and return to this step.
– Power off the system unit.
– Remove the SIMM from bank 1 and install the SIMM removed in Step 050
on page 2-44 in bank 0.
– Power on the system unit.
DID YOU RECEIVE AN XXXXXX XXXX 201, 203, OR 221 POST ERROR?
Yes No
063
Install both SIMMs and run the system memory test several times to
verify the failure symptom no longer exists.
064
Replace the failing SIMM.
065
(From steps 020 and 023)
DID THE ADVANCED DIAGNOSTICS MENU APPEAR?
Yes No
066
Go to “MAP 0020: Power” on page 2-20.
067
(Step 067 continues)
Diagnostic Information 2-47
To Next Page
Loading...
Need help?
General
