v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, “Parts listing, Type 4364 or Type 4365 server,” on page 59 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
System-event/error log message Action
LAN: Telnet tamper triggered. Possible break-in
attempt
Information only.
LAN: Web Server tamper delay triggered.
Possible break-in attempt
Information only.
No ISMP gateway defined for the interconnect
network. RSA x is assuming the gateway
Information only.
OS Watchdog response enabled by x Information only.
OS Watchdog response disabled by x Information only.
PFA Alert, see preceding error in system error
log.
Information only. See the preceding entry in the system-error log.
Possible ASM reset occurred --- reason
unknown
Information only.
Power off Information only.
Power on Information only.
PPP_1: Client connected at nnnn bps Information only.
PPP_1: User requested to abort PPP interface Information only.
PPP[xxx] PPP-Cfg, Local-
IP@=aaa.aaa.aaa.aaa,
Remote-
IP@=bbb.bbb.bbb.bbb NetMsk=ccc.ccc.ccc.ccc,
Auth=ddd
Information only.
Received alert from system x; type: y,
sender’s ID: z
Information only.
Remote access attempt failed Information only.
Remote access attempt failed. Invalid userid or
password received. Userid is ’x’ from TELNET
client at IP@=yyy.yyy.yyy.yyy
Information only.
Remote access attempt failed. Invalid userid or
password received. Userid is ’x’ from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Information only.
Remote access attempt failed. Invalid userid or
password received. Userid is ’x’ from WEB
browser at IP@=xxx.xxx.xxx.xxx
Information only.
Remote login successful. Login ID: ’x’ from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Information only.
Retry count exceeded. Incorrect password
entered too many times for userid x
Information only.
RSA x became the ISMP gateway Information only.
RS485 broadcast from x ignored; more than y
devices present on the RS485 network
Information only.
RS485 connection to system x has ended Information only.
RS485 network overload has cleared; y or fewer
devices are present on the RS485 network
Information only.
50 IBM System x3250 Types 4364 and 4365: Problem Determination and Service Guide