5. If you are instructed to return the feature key, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Installing an optional ServeRAID adapter advanced feature key
To install an optional ServeRAID adapter advanced feature key, complete the
following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 169.
2. Turn off the server and peripheral devices and disconnect the power cords.
3. Remove the cover (see “Removing the cover” on page 177).
4. Align the feature key with the connector on the ServeRAID adapter and push it
into the connector until it is firmly seated.
Chapter 5. Removing and replacing server components 205
To Next Page
Loading...
