IBM System x3650 M3 4255 - Removing an Optional Serveraid Adapter Advanced Feature Key

Removing an optional ServeRAID adapter advanced feature key
To remove an optional ServeRAID adapter advanced feature key, complete the
following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 169.
2. Turn off the server and peripheral devices and disconnect the power cords.
3. Remove the cover (see “Removing the cover” on page 177).
4. Grasp the feature key and lift to remove it from connector on the ServeRAID
adapter.
204 IBM System x3650 M3 Types 4255, 7945, and 7949: Problem Determination and Service Guide