To Next Page

To Previous Page

Modified /boot/grub/menu.lst contents Notes

title floppy

root

chainloader +1

title failsafe

kernel (hd0,1)/boot/vmlinuz.shipped root=/dev/hda2 ide=nodma apm=off vga=normal nosmp 1

disableapic maxcpus=0 3

initrd (hd0,1)/boot/initrd.shipped

Note 1: The kernel line is shown with a line break. In your file, the entire entry must all be on one line.

You must restart the Linux operating system after you complete these procedures

for the changes to take effect and to enable SOL.

Microsoft Windows 2003 Standard Edition configuration:

Note: This procedure is based on a default installation of the Microsoft

Windows

2003 operating system.

To configure the Windows 2003 operating system for SOL operation, complete the

following steps. You must be logged in as a user with administrator access to

perform this procedure.

1. Determine which boot entry ID to modify:

a. Type bootcfg at a Windows command prompt; then, press Enter to display

the current boot options for your server.

b. In the Boot Entries section, locate the boot entry ID for the section with an

OS friendly name of Windows Server 2003, Standard. Write down the boot

entry ID for use in the next step.

To enable the Microsoft Windows Emergency Management System (EMS), at a

Windows command prompt, type

bootcfg /EMS ON /PORT COM1 /BAUD 19200 /ID boot_id

where boot_id is the boot entry ID from step 1b; then, press Enter.

3. Verify that the EMS console is redirected to the COM1 serial port:

a. Type bootcfg at a Windows command prompt; then, press Enter to display

the current boot options for your server.

b. Verify the following changes to the bootcfg settings:

v In the Boot Loader Settings section, make sure that redirect is set to

COM1 and that redirectbaudrate is set to 19200.

v In the Boot Entries section, make sure that the OS Load Options: line

has /redirect appended to the end of it.

The following examples show the original bootcfg program output and the output

after modification.

Chapter 5. Configuration information and instructions 157

IBM System x3650 Type 7979 User Manual

Questions and Answers: