Table 41. FCs for the frame models of the TS4500 tape library (continued)
FC Model CSU Description
2715 L25, L55 No TSSC attachment cable
FC 2715 is a cable to attach a unit to the
Ethernet switch provided by the TSSC.
Note: A maximum of forty-three of the FC
2715 can be included in a single TSSC
facility.
Note: FC 2704 is supported on Lx5 models
if you are connecting the frame to an
existing TSSC.
2735 L25, L55 No USB Optical Drive
This feature is required for all new plant
orders. This feature provides a USB optical
drive for use with the Integrated
Management Console (IMC). The optical
drive is required for IMC code and service
Knowledge Center updates.
2737 S25, S55 No IMC Separate Power Source
This feature will allow longer distances
between the IMC end panel and an FCA
by supplying 2 Ethernet cables that are
longer than normal. For both plant and
field, instructions will also be provided for
moving the IMC PDU from another frame
into this frame. One of the FC 9970-9985,
9989 power cords are a prereq to FC 2737.
4879 L25, D25, TR1 No TS7700 BE Switch Mounting Hardware
This feature provides 2x Fibre channel
switch mounting hardware including rack
brackets and power cords.
Prerequisite: FC 4880
4880 L25, D25, TR1 No TS7700 BE 16 Gb Switch
Provides 1x Fibre channel switch (16 Gb).
There is a maximum of 2x FC 4880 per
model x25.
6013 D25, D55, L25, L55 Yes LC to LC Fibre Channel cable - 13m (43
ft)
6025 D25, D55, L25, L55 Yes LC to LC Fibre Channel Cable - 25m (82
ft)
6061 D25, D55, L25, L55 Yes LC to LC Fibre Channel Cable - 61m (200
ft)
8750 D55, L55 No LTO cleaning cartridge
FC 8750 is a universal cleaning cartridge.
8802 D25, L25 No 3592 cleaning cartridge
9001 D25, D55, L25, L55 No Driveless frame
102 IBM TS4500: Introduction and Planning Guide
To Next Page
Loading...
Need help?
General
