44
7 MAINTENANCE
ROUTINE TESTS (Only to be carried out by a trained ‘responsible’ person)
The following steps should be carried out DAILY in the case of a free standing system (i.e. where its status is NOT monitored by a main
panel or monitoring station), or WEEKLY when the system is monitored.
1) Check control panel for fault indications etc.
2) Test the function of control panel LED's (Not Pico or 'Blind' unit)
3) Record results in system log book & report any abnormal results
The following page gives information on the servicing tests to be carried out on the unit. Servicing must not be carried out by an untrained
or unauthorised person.
To Next Page
Loading...