2 Press [Red] key to select the channels by
different groups, such as by
Favourite/Satellite/Provider/CAS etc.
3 Press [Green] key to select different display
modes including “Now EPG”, “Next EPG”,
“More” and “Schedule”, like the below
image:
4 Press [Yellow] key in EPG menu to set one
record timer or go to Timer List menu.
5 In EPG menu, when you select one event
by highlighting item, you can set this event
to record directly by pressing [REC] button.
6 In EPG menu, press [Exit] to close EPG
screen.
8.13 TV/RADIO
In TV mode, pressing [TV/RADIO] key can
switch to Radio mode. In Radio mode, press
[TV/RADIO] key to switch to TV mode.
8.14 Channel List
1 In full screen, press [OK] key can enter
“Channel List”.
To Next Page
Loading...
