menu shows detailed information about card
inserted into card reader module.
Note:
All information showed in this menu and
submenus are coming from inserted card. If
anything is wrong, it could be card problem.
After inserting the card correctly at any time, a
message will show on the screen with message
about detecting the card, in "card info" menu all
available information will be displayed.
13.2 Common Interface
We provide a CI slot for user to use. Using
different CAM & cards provided by different CAS
operator, user can view many types of
scrambled channels.
We provide this menu to display the detailed
information of the CAM & card inserted in the
slot. User can check all this information
according to the help message at the bottom of
each menu.
Note:
All information showed in this menu and
submenu is abstract from CAM & card. In case
something is wrong, it may be the problem of
CAM or card.
When you insert the CAM correctly at any time,
a message will show on the screen to tell you
that which CAM has been detected by the
receiver and is available now.
CI Message
It is used to turn on or turn off the CI info display
function by using , buttons or “OK” button to
select.
ON: To display the CI info.
OFF: Don’t display the CI info.
14. USB
If you enter to the "USB" Menu, you will see a
picture like the below:
Note: If no USB Hard Disk is connected to the
receiver this menu is not available.
14.1 File List
In this menu you can select the file list from USB
A or USB B. Press [ok] button to enter the File
list. You can check the files and folders of the
USB storage, and you can play MP3 and JPEG
files.
To Next Page
Loading...
