Icecrypt S3250CCIHD - HTTP and FTP Upgrades

36
b. Press [red] button the wireless LAN network
list will appear. Select your Wi-Fi network and
press [OK] button, then input password.
c. Press [OK] button on Connect to start
connection.
2. In this menu you may assign a dynamic IP
address to the digital receiver. To do so,
select the DHCP On.
3. If you have a static IP address, disable the
DHCP, then the IP Address, Subnet Mask,
Gateway and DNS options become
enabled. You have to set these options
according to your IP address.
15.2 Http Upgrade
1. When connected to the Internet, receiver
can manually or automatically software
update from server.
Note:
This function depends on connection with
external server. In case of no software on
server, this function will not work.
15.3 FTP Upgrade