5 Load Default OSD Setting: If you are not
satisfied with your settings, you can move
highlight to this item and press [OK] key to
reset parameters to default value.
6 Press [Exit] key to return from the “OSD
Setting” menu.
12. System
When you enter “System” menu, you will see a
screen like below:
In “System” menu:
1 Press [Up/Down] key to select menu pages
from Information, Default Setting, Software
Upgrade, Upgrade By USB, Backup to USB
2 Press [OK] key to enter the selected item.
12.1 Information
1 When you enter “Information” menu, you will
see a screen like above. The screen
displays :MODEL ID,S/W VERSION,H/W
VERSION,LOADER VERSION,LATEST
UPDATE,STB SN,STB ID,VFD
(LED)Version.
2 Press [Exit] key to return to “Tools” menu.
12.2 Default Setting
12.2.1 Default Value:
When you press [OK] key in the “Default
Setting” item:
1 There will pop up a message for you to
enter the password, and the default
password is “0000”.
2 After you enter the correct password, a
warning message will display to confirm
“The operation will load default and erase
all the channels that user added,
continue?”.
To Next Page
Loading...
