2 Press [Up/ down] key to select satellite.
Press [Page] key to page up or page down.
LNB Type
In this option press[Volume Up/ Volume
Down]key to switch among “Standard”, “User”,
“Universal” and ”Unicable” mode.
DiSEqC
DiSEqC: You can use [Volume Up/ Volume
Down] key to switch options. There are
several options for your selection:
a) Disable: No DiSEqC.
b) 1/2, 2/2: two DiSEqC ports.
c) 1/4, 2/4, 3/4, 4/4: 4 DiSEqC ports.
d) 1/8, 2/8… 8/8: 8 DiSEqC ports.
e) 1/16, 2/16….16/16: 16 DiSEqC ports.
Positioner
Positioner： In “Positioner” option, you can press
[Volume Up/ Volume Down] key to switch “Off /
DiSEqC 1.2 / USALS” functions.
22K
You can use [Volume Up/ Volume Down] key to
switch “ON / Off”. When this option is switched
“ON”, receiver will receive TV and radio input
signals from 22K port. If the option is switched
“Off”, the receiver will receive all signals from 0K
port.
Notice!
When you choose LNB type “Universal”, you
cannot modify 22K.
0/12V
You can use [Left/ Right] key to switch “on /off”.
Polarity
In “Polarity” option, [Volume Up/ Volume Down]
key switches “Auto / H / V” functions.
Toneburst
In “Toneburst” option, you can press [Volume
Up/ Volume Down] key to switch “Off/On”
function.
To Next Page
Loading...