Icom i9100

123
9
GPS/GPS-A OPERATION
■ GPS operation (Continued)
D Position display
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [POS](F-1) to display the position data. Then
push [F-2] one or more times to display your current
position, received position or GPS memory alarm
position information.
 •Whilethepositiondataisdisplayed,push[F-1]toselect
North or South as the top of the compass.
 •MYPosition :Displaysyourownlatitude,longi-
tude, direction*, elevation* and the
time*.
* These items do not appear when
“Manual”isselectedasthe“MYPo-
sition” item option in the GPS Set
mode. (p. 132)
 •RXPosition :Displaysthecaller’s(otherstation)
latitude, longitude, call sign, direc-
tion and distance from your posi-
tion.
 •GPMPosition:DisplaystheGPSMemorychan-
nel’s latitude, longitude, direction
and distance from your position,
if the GPS Alarm function is set to
the channel.
   •IftheGPSAlarmfunctionissettoall
channels or a bank, “–” is displayed
instead of the position information.
e Push [MENU] to return to the “GPS” screen.
NOTE: Depending on the GPS signals, your posi-
tion/elevation may change even though you are sta-
tionary.
These sample indications assume that “Position For-
mat” is selected as “ddd°mm.mm,” and “Units” is se-
lected as “feet/mile.” (p. 132)
“TIME” data may not be displayed, depending on the
connected GPS receiver.
[F-2] [CALL/GPS][MENU]
[POS]
Ú
GL
Ú
GPM Position
G 35˚45.00’N
135˚36.00’E DST:1051
ml
GL WR
GL WR
MY Position
GPMPOS MSG SET
GPS
M 20˚35.00’N ELE: 16ft
134˚26.00’E 12:00:00
Ú
RX Position
R 35˚45.00’N JA3YMK
135˚36.00’E DST:1051
ml
Push
Push
Push
• My position
• Received position
• GPS Memory alarm position
Approximately 2 seconds
Approximately 2 seconds
Approximately 2 seconds