34
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■ VFO description
TheIC-9100hastwoVFOs;“A”and“B,”foreachMAIN
and SUB Bands, and are convenient for quickly select-
ing two frequencies,orsplitfrequencyoperation.You
can use either VFO to call up a frequency and operat-
ing mode.
VFO is an abbreviation of Variable Frequency Oscil-
lator.
D Selecting the VFO A/B
➥ Push [A/B] to switch between the VFO A and
VFO B.
•“VFOA”or“VFOB”appearswhentheVFOisselected.
D VFO equalization
➥ Hold down [A/B] for 1 second to equalize the data
in both VFOs.
•3beepssoundwhentheequalizationiscomplete.
CONVENIENT!
Use two VFOs as quick memories:
When you find a new station, but wish to continue
searching, the dual VFO system can be used for quick
memory storage.
q Hold down [A/B] for 1 second to store the displayed
contents into the undisplayed VFO.
w Continue searching for stations.
e Push [A/B] to show the stored contents on the un-
displayed VFO.
r To continue searching for stations, push [A/B] again
to show the displayed VFO.
■ Selecting VFO/memory mode
➥ Push [VFO/MEMO] to switch between the VFO
and memory modes.
•“VFOA”or“VFOB”appearswhenintheVFOmode,or
“MEMO” appears when in the memory mode.
•Holding down [VFO/MEMO] for 1 second copies the
contents of the selected memory channel into the dis-
played VFO. (p. 142)
Memory icon
The selected VFO icon
The selected VFO icon
q Hold down
e Push
Displayed VFO
Undisplayed VFO
Memory channel number
To Next Page
Loading...
