45
4
RECEIVE AND TRANSMIT
2001 NEW
DD
Transmit frequency monitor check
You may be able to receive the other party’s transmit
signal directly without having to go through a repeater.
This function allows you to check this.
➥ While receiving, push and hold [XFC] to see if you
can receive the other party’s transmit signal directly.
•While holding [XFC], the offset direction and frequency
are displayed on the multi-function switch indicator.
DD
Repeater tone frequencies
The transceiver’s repeater tone frequency is set to
88.5 Hz by default. This can be changed if desired.
q While M1 is selected, push [F4 TON] to turn the
tone encoder ON.
•“T” appears.
w Push [F4 TON] for 1 sec. to select the tone fre-
quency set mode.
e Push [F1 TON] several times to select Rptr
Tone, if necessary.
r Rotate the tuning dial to select the desired fre-
quency. (see the table at right)
t Push [MENU] to return to M1.
DD
Storing a non standard repeater
q Turn the auto repeater function OFF in the set
mode. (p. 83)
w Push [AM/FM] to select FM mode.
e Push [V/M], then [A/B] to select VFO A.
r Rotate the tuning dial to set the repeater output fre-
quency.
• Set the tuning step if desired.
t Push [A/B] to select VFO B.
y Rotate the tuning dial to set the repeater input fre-
quency.
u Push [A/B] to select VFO A.
i Push [SPLIT] to turn the split function ON.
o Push [F4 TON] to turn the previously set tone en-
coder ON.
!0 Rotate [M-CH] to select the desired memory chan-
nel.
•“BLANK” appears when a blank channel is selected.
!1 Push [MW] for 1 sec. to store the contents in the se-
lected memory channel.
AGC
DUP
CMP
TON
SCP
-6OO.Ok
[XFC]
[AM/FM] [SPLIT] [A/B] [M-CH]
[MW]
[V/M]
67.0
69.3
71.9
74.4
77.0
79.7
82.5
085.4
088.5
091.5
094.8
097.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
TON
SCN
88.5Hz
Rptr
Tone
• Available tone frequencies (Unit: Hz)
IC-7400.qxd 02.4.2 11:35 Page 45
To Next Page
Loading...
