Icom IC-M411 - International Channels; USA Channels; ATIS and DSC Channels

6
3
BASIC OPERATION
New2001
ï International channels
There are pre-programmed 57 (EUR version,) 59 (U.K. ver-
sion,) 58 (Holland version) or 56 (FRG version) International
channels for the IC-M411.
q Push [CH•DUAL] to select a regular channel.
w Push both [s] and [t] on the transceiver to change the
channel group, if necessary.
• EUR version has International channels only and this function
is not available.
e Push [Y] or [Z] to select a channel.
• “DUP” appears for duplex channels.
Push
and
ï U.S.A. channels (U.K. version only)
For U.K. version, there are pre-programmed 61 U.S.A. chan
-
nels in addition to 59 International channels.
q Push [CH•DUAL] to select a regular channel.
w Push both [s] and [t] on the transceiver to change the
channel group, if necessary.
• International and U.S.A. channels can be selected in sequence.
e Push [Y] or [Z] to select a channel.
• “DUP” appears for duplex channels.
Push
and
ï ATIS and DSC channels
(Holland and FRG versions only)
For Holland and FRG version, there are pre-programmed 57
ATIS and 57 DSC* channels in addition to 58 (Holland ver
-
sion) or 56 (FRG version) International channels.
q Push [CH•DUAL] to select a regular channel.
w Push both [s] and [t] on the transceiver to change the
channel group, if necessary.
• International, ATIS and DSC* channels can be selected in se-
quence.
e Push [Y] or [Z] to select a channel.
• “DUP” appears for duplex channels.
Push and
ATIS channel
DSC channel*
*FRG version only