Icom IC-M411 - Transmitting an All Ships Call

25
6
DSC OPERATION
New2001
6
D Transmitting an All Ships call
Large ships use Channel 70 as their ‘listening channel.’
When you want to announce a message to these ships
within range, use the
‘ All Ships call’ function.
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select “ALL SHIPS,” push [ENT].
Scrolls
e Push [Y] or [Z] to select the desired category, push
[ENT].
• Output power of ‘Routine’ category is 1 W (low power) only.
• The selectable category may differ according to the pro-
grammed setting. Ask your dealer for the available categories.
r Push [Y] or [Z] to select the desired ITU channel, push
[ENT].
• After pushing [ENT], Channel 70 is automatically selected and
“READY” appears at the channel comment indicator.
Push
t Push [ENT] to transmit the All Ships call.
Transmitting
y After the All Ships call has been transmitted, the specified
channel (in step
r) is selected automatically.
Scrolls