12
New2001
DUALWATCH/TRI-WATCH
5
n Description
Dualwatch monitors Channel 16 while you are receiving on
another channel; Tri-watch monitors Channel 16 and the
call channel while receiving another channel. Dualwatch/Tri-
watch is convenient for monitoring Channel 16 when you are
operating on another channel.
n Operation
q Select Dualwatch or Tri-watch in Set mode. (p. 40)
w Push [Y] or [Z] to select the desired channel.
e Push and hold [CH•DUAL] for 1 sec. to start Dualwatch
or Tri-watch.
• “DW” blinks during Dualwatch; “TW” blinks during Tri-watch.
• A beep tone sounds and “16” blinks when a signal is received
on Channel 16.
r To cancel Dualwatch/Tri-watch, push [CH•DUAL] again.
DUALWATCH/TRI-WATCH SIMULATION
• If a signal is received on Channel 16, Dualwatch/Tri-
watch pauses on Channel 16 until the signal disappears.
• If a signal is received on the call channel during Tri-
watch, Tri-watch becomes Dualwatch until the signal dis
-
appears.
• To transmit on the selected channel during Dualwatch/
Tri-watch, push and hold
[PTT].
[Example]: Operating Tri-watch on INT Channel 25
q Tri-watch starts. w Signal is received on
call channel.
e Signal is received on
Channel 16 takes priority.
r Tri-watch resumes after the
signal disappears.
To Next Page
Loading...
