Icom IC-M411 - Deleting Address ID; Programming Group ID

15
6
DSC OPERATION
New2001
6
D Deleting Address ID
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select “ADDRESS,” and push [ENT].
e Push [Y] or [Z] to select “DEL INDV ID,” push [ENT].
• When no address ID is programmed, “NO ID” is displayed.
Scrolls
r Push [Y] or [Z] to select the desired ID name for delet-
ing and push
[ENT].
• “READY” appears.
t Push [ENT] to delete the selected address ID and returns
to the normal operation.
D Programming Group ID
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select “ADDRESS,” push [ENT].
e Push [Y] or [Z] to select “ADD GROUP ID,” push [ENT].
Scrolls
r Push [Y] or [Z] to set the 9-digit Group ID, push [ENT].
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [CLR] to cancel and exit the condition.
1st digit ‘0’ is fixed for a Group ID.
☞ Continue to the next page