26
6
DSC OPERATION
New2001
D Transmitting a Position Request call
Transmit a Position Request call when you want to know a
specified ship’s current position, etc.
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select “POS REQUEST,” push [ENT].
e Push [Y] or [Z] to select the desired pre-programmed
Individual address, push
[ENT].
• The ID code must be set in advance. (p. 14)
• After pushing [ENT], Channel 70 is automatically selected and
“READY” appears at the channel comment indicator.
r Push [ENT] to transmit the Position Request call.
t After the Position Request call has been transmitted, re-
turns to the normal operation.
To Next Page
Loading...
