Icom IC-M411 - LCD Backlight Adjustment; LCD Contrast Adjustment

38
6
DSC OPERATION
New2001
n Automatic acknowledgement
This item sets the automatic acknowledgement function ON
or OFF.
When a position request or polling request call is received,
transceiver automatically transmits a position request reply
or polling reply call, respectively.
q Push [MENU] to enter the DSC menu.
w Push [s] or [t] to select “AUTO ACK,” and push [ENT].
Scrolls
e Push [s] or [t] to turn the automatic acknowledgement
function ON or OFF
.
r Push [ENT] to set the condition.
• Push [CLR] to cancel and exit the condition.
n Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [MENU] to enter the DSC menu.
w Push [s] or [t] to select “OFFSET TIME,” and push
[ENT].
Scrolls
e Set the offset time from the UTC (Universal Time Coordi-
nated) time using
[s] or [t].
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [CLR] to cancel and exit the condition.
r Push [ENT] to program and to exit the condition.
The local time indication is not available when the GPS
receiver (sentence formatter RMC) is connected, the
transceiver’s display indicates UTC time only.
New2001