40
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
D Receiving a Position Request call
(May not be used, depending on the presetting)
NOTE: Even if the Auto ACK function is set to “Manual,” after receiving a Distress
automatically sent to the calling station.
When a Position Request call is received:
• An alarm sounds.
•
1. Push
to turn OFF the alarm.
2.
Ignores the call and returns to the
operating screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you display
the call message.
Main screen.
( Able to
comply)
(Unable to
Comply)
Comply.”
• The call is saved in the DSC Log.
•
information, and then returns to the
operating screen by pushing
, and
then
.
Accepts the call.
• Displays the received call’s information.
• The call is saved in the DSC Log.
Push
or
, then push
(p. 32)
To Next Page
Loading...
