63
9
D Entering a waypoint
The position information that you want to memorize can be added as a waypoint.
NOTE: You can also add your current position as a waypoint by pushing
.
1. Open the “Waypoint” screen.
[MENU] > Navigation > Waypoint
2. Push
to add a waypoint.
3. Enter a name.
• The “Name:” screen is displayed.
TIP:
• Select
to enter numbers and letters, and to
enter symbols.
•
•
number or character.
•
entered character.
4. Repeat step 3 to enter the name of up to 15
characters.
5. Select
save the name.
• The “LAT:” screen is displayed.
L
Push any key to return to the previous screen.
6. Enter a latitude.
L When GPS data is received, your current position
information is automatically displayed.
7. Select
save the latitude.
• The “LON:” screen is displayed.
L
screen is displayed. Push any key to return to the
previous screen.
8. Enter a longitude.
L When GPS data is received, your current position
information is automatically displayed.
9. Select
save the longitude.
• The waypoint is saved, and the transponder returns to
the previous screen.
L
screen is displayed. Push any key to return to the
dialog screen.
To Next Page
Loading...
