64
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
9
D Deleting a waypoint
A waypoint can be deleted from the Waypoint list.
L You cannot delete the waypoint that is now being used for navigation.
1. Open the “Waypoint” screen.
[MENU] > Navigation > Waypoint
2.
L Push
to sort the waypoints by Name or Range.
3. Push
.
• “Delete the Waypoint. Are you sure?” is displayed.
4. Push
.
• The selected waypoint is deleted, and the transceiver returns to the previous screen.
D Editing a waypoint
A waypoint’s name, latitude, longitude data can be edited.
L You cannot edit the waypoint that is being used for navigation.
1. Open the “Waypoint” screen.
[MENU] > Navigation > Waypoint
2.
L Push
to sort the waypoints by Name or Range.
3. Select
.
L See steps 3 ~ 9 in “Entering a waypoint” on page 63.
D Navigating to a waypoint
The transceiver assists you to navigate to a selected waypoint in the Waypoint list.
L See “Navigation” on page 67 for details.
1. Open the “Waypoint” screen.
[MENU] > Navigation > Waypoint
2.
L Push
to sort the waypoints by Name or Range.
3. Push
.
• “Start navigation. Are you sure?” is displayed.
4. Push
.
• The plotter screen is displayed, and the transceiver starts to navigate to the waypoint.
•
is displayed on the plotter screen.
L See step 4 in “Using
” on page 67.
TIP: You can also start navigation in the “Detail” screen of the waypoint.
1. Repeat steps 1 and 2.
2. Push
• The “Detail” screen is displayed.
3. Repeat steps 3 and 4.
To Next Page
Loading...
