iDataLink maestro Rr Install Guide

Automotive Data Solutions Inc. © 2016
6
PIORRSRCHR02DSOGEN
USING MAESTRO FEATURES - GAUGES
•OBD2 Communication
Auto Disable (default)
The module will communicate with the vehicle’s OBD2 system unless it detects another
device. This may be a scan tool or aftermarket programmer connected to the vehicle.
Always Enabled
The module will communicate with the vehicle’s OBD2 system even when a scan tool
or aftermarket programmer is connected. However, some scan tools and aftermarket
programmers will not function when this option is enabled.
Disabled
The module will not communicate with the vehicle’s OBD2 system. This option applies when
using a scan tool or aftermarket programmer that does not allow multiple connections at
the same time.
Enabled on Demand
The module will only communicate with the vehicle’s OBD2 system when the vehicle info
or gauges screen is displayed. This is used in vehicles that issue a periodic vehicle health
report through a factory system such as Sync or OnStar. However, applying this setting may
cause the fuel economy calculations to be inaccurate.
USING MAESTRO
FEATURES -
GAUGES
HOW TO GET THERE:

iDataLink maestro Rr Specifications

General

Category	Automobile Accessories
Type	Vehicle Interface Module
Compatibility	Works with select vehicles and aftermarket radios
Features	Retains factory features
Functionality	Allows integration of aftermarket radios with factory vehicle systems
Programmability	Programmable via Weblink desktop application
Firmware Updates	Supports firmware updates through Weblink
Data Bus Support	CAN bus
Vehicle Coverage	Compatible with a wide range of makes and models
Additional Features	May include support for factory amplifiers, backup cameras, and more
Installation	Professional installation recommended