iDataLink maestro Rr Install Guide

Automotive Data Solutions Inc. © 2016
7
PIORRSRCHR02DSOGEN
CHANGING SETTINGS
CHANGING
SETTINGS
HOW TO GET THERE:
VEHICLE FACTORY SETTINGS
Access And Change Vehicle factory Settings
• Vehicle Amplifi er
To adjust the settings of your factory amplifi er,
press on Vehicle Amplifi er. This setting will
only appear if your Maestro RR module detects
a compatible amplifi er in your vehicle. This
feature must be retained during the Maestro
RR online programming with the Weblink
Updater.
The Gain setting will change the gain of the
factory amplifi er. The Amplifi er Retention setting is used to tell the Maestro module if you
are using (retaining) the factory amplifi er or if you have bypassed it.
MAESTRO FEATURES SETTINGS
Access And Change Maestro Features
• Module Audio Gain
Used to adjust the audio gain of the Maestro module. All audio that passes from the factory
systems into the Maestro will be affected by this setting.
•Module Master Reset
Used to reset the Maestro module.
•Accessory During Crank
If this setting is turned on, the radio will stay
powered while the engine is started. If this
setting is turned off, the accessory circuit
will drop out while the engine cranks, like a
normal accessory circuit.

iDataLink maestro Rr Specifications

General

Category	Automobile Accessories
Type	Vehicle Interface Module
Compatibility	Works with select vehicles and aftermarket radios
Features	Retains factory features
Functionality	Allows integration of aftermarket radios with factory vehicle systems
Programmability	Programmable via Weblink desktop application
Firmware Updates	Supports firmware updates through Weblink
Data Bus Support	CAN bus
Vehicle Coverage	Compatible with a wide range of makes and models
Additional Features	May include support for factory amplifiers, backup cameras, and more
Installation	Professional installation recommended