13: S
CRIPTS
13-2 S
MART
AXIS P
RO
/L
ITE
U
SER
'
S
M
ANUAL
FT9Y-B1378
Device List
This section shows the devices that can be used in Script Editor and the device notation.
This section describes available devices and its notation that can be used in the Script Editor dialog box.
Note: The device ranges differ depending on each SmartAXIS. Specify the devices within the device range of the selected SmartAXIS. For device
ranges, see "Device Addresses" on page 7-1.
Calculations in which both bit and word devices are used are not allowed.
Bit devices are always processed as bits, and values of those devices are 0 (OFF) or 1 (ON).
Applicable SmartAXIS
Device Notation in Script Editor
Bit device
I (Inputs) I000 to I155
Q (Outputs) Q000 to Q141
R (Shift registers) R000 to R127
M (Internal relays)
M0000 to M1277,
M8000 to M8177
C (Counter contacts) C000 to C199
T (Timer contacts) T000 to T199
D (Data register bits)
D0000.0 ... D0000.15 to D1999.0 ... D1999.15,
D8000.0 ... D8000.15 to D8199.0 ... D8199.15
Word device
D (Data registers)
D0000 to D1999,
D8000 to D8199
TC (Timer current values) TC000 to TC199
TP (Timer preset values) TP000 to TP199
CC (Counter current values) CC000 to CC199
CP (Counter preset values) CP000 to CP199
FT1A-12 FT1A-24 FT1A-40 FT1A-48
XXXX
To Next Page
Loading...
Need help?
General
