S
MART
AXIS P
RO
/L
ITE
U
SER
'
S
M
ANUAL
FT9Y-B1378 5-3
5: S
PECIAL
F
UNCTIONS
Communication Ports Configure the communication ports for the SmartAXIS to communicate with external devices equipped
with RS232C or RS485 ports.
• Maintenance communication
• User communication
• Modbus RTU master/slave
Cartridges Downloads the user program in a memory cartridge to the SmartAXIS module's ROM.
LCD Settings Configure the LCD settings for the SmartAXIS.
• Backlight ON Time
• Monitoring Ladder Program
• Message Settings
Device Settings Configure the order to store the upper and lower words for 32-bit data.
Program Protection Applies the protection to the user program by configuring a password so unauthorized users cannot
inadvertently upload or download it.
Self Diagnostic Configure the watchdog timer monitoring the operating status of the SmartAXIS.
Calendar & Clock The SmartAXIS is equipped with an internal clock and its calendar data (year, month, day, day of the
week) and clock data (hour, minute, second) can be used in user programs. Daylight savings time can
also be configured for the internal clock.
Network Settings Configure the network settings to connect the SmartAXIS to the network using the Ethernet port.
Connection Settings Configure server/client communication used by the SmartAXIS Ethernet port.
• Maintenance communication server
• User communication server/client
• Modbus TCP communication server/client
• Remote I/O master
To Next Page
Loading...
